Reverb tail, Reverb tail input mixing, 2 reverb tail – Sonnox Oxford Reverb User Manual
Page 20: 1 reverb tail input mixing
7.2 Reverb Tail
7 DESCRIPTION OF CONTROLS
7.2 Reverb Tail
7.2.1 Reverb Tail Input Mixing
The facility is provided to drive the input of the Reverb Tail processor with a combination
of signals comprising of; the untreated input signal, the delay compensated input signal
and the output of the Early Reflections processing. Two levels of crossfade control are
provided for this mixing function, so that relative contributions can be varied freely without
disturbing overall levels:
Delay Comp
This control sets the timing of the delay compensated input contribution to the
Reverb Tail processing.
With the ER TRACK button selected, the DELAY COMP input signal tracks the
notional size of the Early Reflection processing section. The available control
adjustment is from zero to 2.0 times the early reflection SIZE setting, with its mid
position (1.0) representing the normalised time alignment setting.
With the ER TRACK button deselected, the DELAY COMP control is uncoupled from
the Early Reflections SIZE setting, and provides an independent delay up to a
maximum of 30 meters.
ER Mix
This provides a crossfade between the untreated input signal and the output of the
Early Reflections processor.