Sonnox Oxford Restore - Manual (Page 18)

18
Clearly here the Sensitivity is far too low. The optimal setting is just before the fundamental
appears in the Audio output.
The Alternative Mode of Buzz Removal
There is a second mode of Buzz removal that might be more appropriate under some
circumstances. The sequence above is using the default mode of repair. If Alt Mode is selected,
the characteristics of the sequence reverse, with the harmonics appearing in the Audio output
first, and finally the Fundamental. The following sequence of figures shows the Audio output
with a reducing sensitivity, but this time with Alt Mode on.
Sensitivity at maximum:
Lowering sensitivity with the higher harmonics appearing in the Audio output: