Sonnox Oxford Restore User Manual
Page 33
33
5.8
DeNoiser Signal / Control Flow Diagram
5.9
DeNoiser Stereo Behaviour
For correct stereo operation, when instantiated into a stereo track the DeNoiser has two
independent repair circuits.
In Manual mode, there is only one noise profile that is applied to both stereo channels.
In Freeze mode, there are two separate noise profiles, and both are displayed in the graph area.
In Auto mode, a single combined left and right noise profile is derived and displayed. This is so
that the stereo separation and sound field is preserved.
If there is a distinct difference in the noise content of the left and right channels in a stereo
signal, it is preferable to use Freeze mode where possible, or perhaps use a mono instantiation on
the individual left and right sources.