Prevent electrostatic discharge – Spectrum Controls 2080sc-OW2IHC User Manual

Page 4

background image

Micro800™ 2 Ch High Current Digital Output Module

Publication 0100188-01 Rev. A

Prevent Electrostatic Discharge

Electrostatic discharge can damage integrated
circuits or semiconductors if you touch bus connector
pins. Follow these guidelines when you handle the

 Touch a grounded object to discharge static


 Wear an approved wrist-strap grounding


 Do not touch connectors or pins on

component boards.

 Do not touch circuit components inside the


 If available, use a static-safe work station.

 When not in use, keep the module in its

static-shield box.

To comply with the CE Low Voltage Directive (LVD),
all connected I/O must be powered from a source
compliant with the following: Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage

Micro800™ 2 Ch High Current Digital Output Module


Publication 0100188-01 Rev. A

Intentionally Left Blank