Pattern programming patterns low voltage detection, Green wire ( permanent mount versions ) – Star Headlight & Lantern 200ZHL Series User Manual
Page 3
-2-
Set the flash pattern using either of the following:
• Green wire (permanent mount versions)
• Pattern Select switch on the cig plug (mag mount versions)
1. Power up the light. The lights are preset at the factory for Pattern #6.
2. Cycle through the patterns by touching and releasing the green wire to ground or
pressing and releasing the Pattern Select button.
3. After the pattern has been set, tape or place a wirenut over the end of the green wire
to prevent it from coming into contact with ground again (permanent mount versions).
Pattern Programming
Patterns
Low Voltage Detection
200ZHRL Series Only !!
All of the beacons that have the rotational patterns also have low input voltage detection. With this
feature the beacon senses the input voltage and flashes a fast pattern (approximately 16 cycles
per second) to indicate to the user that the battery voltage is low (less than 10V). Once the input
voltage returns to normal (greater than 12V) the unit will return to the normal flashing.
Phase 1
Flash
Pattern
Phase 2
Flash
Pattern
(200ZHRL Only)
Pattern
Type
Pattern Description
200ZHRL
Shortcut
1
13
K
Flicker †
2
14
L
Fast Doubleflash
3
15
M
Tripleflash †
4
16
A5
PSU Flicker (200ZHL only)
CCW Rotation (200ZHRL only)
5
17
A6
PSU Random (200ZHL only)
CCW Fast Rotation (200ZHRL only)
6
18
F
Quadflash †
Pattern 6 :
6 Sec or 2 flash
or
Pattern 18:
12 sec or 4 flashes
7
19
G
Quadflash w/Post-Pop †
8
20
H
Singleflash †
9
21
I
Doubleflash †
10
22
J
Variable AKA Delta-Omega
11
23
C
Post pop 1.4CPS †
12
24
E
Random 0.4CPS
N/A
Steady
15 sec or 5 flashes
† - Approved patterns for SAE J845
Pattern Shortcuts: Press Pattern Select button or hold Green wire to ground for indicated time.
Steady Burn: Not in pattern cycle. Only accessible through shortcut. Press Pattern Select button or
hold Green wire to ground for time indicated above.
Pattern 4:
3 sec or 1 flash
or
Pattern 16:
9 sec or 3 flashes
200ZHL
Shortcut
Pattern 1:
3 sec or 1 flash
Pattern 6 :
6 Sec or 2 flash
9 sec or 3 flashes