Star Headlight & Lantern 8600 Series Intercepto - 66" Tow Packages - Manual (Page 17)

-14-
Flash
Pattern #
Pattern
Type
Phase Pattern Description CPS Pattern Defaults
1 K
1
Flicker † 1 3Sec (Non-Rotating Only)
2 L Fast Doubleflash 3.3
3 M Tripleflash † 2.5
4
N
A5
PSU Flicker (Non-Rotating Models)
CCW Rotation 1 (Rotating Models) † 0.7
1.3 3Sec
(Rotating Only)
5
O
A6
PSU Random (Non-Rotating Models)
CCW Rotation 2 (Rotating Models) 0.6
2.7
6 F Quadflash †‡ 1 6Sec
7 G Quadflash w/Post-Pop †‡ 1
8 H Singleflash †‡ 1
9 I Doubleflash †‡ 1
10 J Variable AKA Delta-Omega 0.3
11 C Post pop 1.4CPS † 1.4
12 E Random 0.4CPS 0.4
13 K
2
Flicker † 1 9Sec (Non-Rotating Only)
14 L Fast Doubleflash 3.3
15 M Tripleflash † 2.5
16
N
A5
PSU Flicker (Non-Rotating Models)
CW Rotation 1 (Rotating Models) † 0.7
1.3 9Sec
(Rotating Only)
17
O
A6
PSU Random (Non-Rotating Models)
CW Rotation 2 (Rotating Models) 0.6
2.7
18 F Quadflash †‡ 1 12Sec
19 G Quadflash w/Post-Pop †‡ 1
20 H Singleflash †‡ 1
21 I Double flash †‡ 1
22 J Variable AKA Delta-Omega 0.3
23 C Post pop 1.4CPS † 1.4
24 E Random 0.4CPS 0.4
NA N/A Steady NA 18Sec
† - Approved patterns for SAE J845
‡ - California Title 13
To set the light to one of the Pattern Defaults, hold the Pattern Select wire to GROUND
for the appropriate time as stated in pattern list.
(LED Pattern Programming cont’d)
360º Halo™ Flash Patterns
(touch Red w/Green to ground)
1. Power up the LED heads you wish to program by applying power to the appropriate wire (s)
(usually Red for Halo heads).
2. Briefly touch the Red w/Green stripe wire to ground and release it, repeating this to scroll
through the patterns listed below. The cycle will repeat itself after the last pattern.
3. Once you find the pattern you wish to select, leave the Pattern Select wire
disconnected and turn the LEDs off. This will store the selected pattern.
360º Halo Head Flash Patterns (touch Red w/Green to Ground)