Front and rear dlx6 and batwing led flasher units – Star Headlight & Lantern 2500 Series - 56" Emergency Packages User Manual

Page 11

Advertising
background image

-8-

Front and Rear DLX6 and Batwing LED Patterns

(LDF375-1 Flasher)

Pattern Warning Pattern Style

1

Pursuit Mode

(1 flash/3 sec default)

2

Alternating Slow Single (1-5 vs 6-10) (Title 13 Approved)

3

Alternate Pursuit Mode

4

Alternating Quad Flash (1-5 vs 6-10)

5

Alternating Triple (1,2,6,7,8 vs 3,4,5,9,10)

6

Alternating Quint (1,2,6,7,8 vs 3,4,5,9,10)

7

Simultaneous Slow Single (All Modules) (Title 13 Approved)

8

Simultaneous Fast Single (All Modules)

9

Simultaneous Triple Flash (All Modules)

10

Simultaneous Quad Flash (All Modules)

11

Simultaneous Quint Flash (All Modules)

12

Simultaneous Fast Triple Flash (All Modules)

13

Simultaneous Fast Quint Flash (All Modules)

14

In/Out Single (1,2,9,10 vs 3-8)

15

In/Out Triple (1,2,9,10 vs 3-8)

16

In/Out Quint (1,2,9,10 vs 3-8)

17

In/Out Single (1,2,3,8,9,10 vs 4-7)

18

In/Out Triple (1,2,3,8,9,10 vs 4-7)

(2 flashes/6 sec default)

19

In/Out Quint (1,2,3,8,9,10 vs 4-7)

20

1-5 Steady; 6-10 Single Flash (Title 13 Approved)

21

1-5 Steady; 6-10 Slow Single Flash (Title 13 Approved)

22

6-10 Steady; 1-5 Single Flash (Title 13 Approved)

23

6-10 Steady; 1-5 Slow Single Flash (Title 13 Approved)

24

Sequential Back And Forth

(3 flashes/9 sec default)

25

Sequential In/Out

26

Burst All w/ Alternating Burst

27

Alternating Burst w/ Simultaneous Double Then Quint

28

Simultaneous Burst w/ Alternating Double Then Quint

29

Hyper-Random

30

Pre-Pop Triple Flash

31

Alternating Pre-Pop Triple Flash

32

Demo (Cycle Through Patterns 1-4,6-9,13-20,25-29)


Please Note: At any time during the programming sequence, you can reset the flash

pattern back to any of the default patterns (Pattern 1, 18, or 24) by holding
the red w/green Pattern Select wire to +12VDC until the heads flash the
specified number of times, then releasing it.


Each LED flasher has 20 output terminals (10 pairs). The two terminals in each pair are
electrically connected and will flash at the same time. The numbers in parenthesis in the
list above indicate which output pairs flash together vs. the pairs they flash opposite of.

LED Flash Patterns

1
2
3
4
5
6
7
8
9

10

Output Pair

Please Note: The 20 output
terminals are enabled by 3
different inputs:

White - 1,2,9,10 (Corners)

Orange - 3,8 (Outboard)
Brown - 4,5,6,7 (Inboard & Ends)

White

Orange

Brown

Yellow

Red/Green

Black

Purple

L

a

rg

e

R

e

d

White = Corner Enable

Orange = Outboard Enable
Brown = Inboard & Ends

Yellow = Cruise

Red/Green = Pattern Select
Black = Ground
Purple = High/Low Power
Large Red = Power

Front and Rear DLX6 and Batwing LED Flasher Units

(LDF375-1 / 8070-375-1)

Advertising
This manual is related to the following products: