Star Headlight & Lantern 5600 Series 66" Warning Packages - Manual (Page 12)

-9-
(Strobe Pack Connections For Lightbars With Linear Heads CONT’D)
Lightbars with Eight Linear Strobe Heads
RP249-L
Front
(Pack A)
1A 2A 3A 4A
4B 3B 2B 1B
RP249-L
Rear
(Pack B)
Three wires in your cable harness control the strobe power supplies and the strobe heads
connected to them: The functions of those wires are as follows:
Red - Front Linear Strobe Heads On/Off
Red w/Black Stripe - Rear Linear Strobe Heads On/Off
Red w/Green Stripe - Pattern Select
Note: Heads #1 & #4 will flash together alternating with #2 & #3.
Activating All Strobe Heads Together
(MOST APPLICATIONS)
To turn on all eight heads
connected to the power supply
together, connect the Red and
Red w/Black Stripe wires together
through your On/Off switch.
When the switch is thrown, all of
your strobes will flash. (#1 & #4
will alternate with #2 & #3)
Proceed to the Pattern
Programming section on page 11
to program the flash pattern of your
strobe packs.
Red w/Black
H
a
rn
e
s
s
fr
o
m
L
ig
h
tb
a
r
Red
CONNECT
TO +12 VDC
On/Off
SWITCH
Red w/Green
Touch and Release To
+12VDC to Change Pattern
DO NOT PERMANANENTLY
CONNECT Red w/Green
Stripe TO +12VDC!!!
!!!!
Activating Front and Rear Strobes Separately
To turn on your front strobe
separately from your rear
strobes, connect the Red and
Red w/Black Stripe wires
through two separate switches.
When one switch is thrown, only
the front strobes will flash. (#1 &
#4 will alternate with #2 & #3).
When the other switch is thrown
the rear strobes will flash.
Proceed to the Pattern
Programming section on page 11
to program the flash pattern of your
strobe pack.
Front Strobes
On/Off Switch
CONNECT
TO +12 VDC
Red w/Black
Touch and Release To
+12VDC to Change Pattern Red w/Green
DO NOT PERMANANENTLY
CONNECT Red w/Green
Stripe TO +12VDC!!!
H
a
rn
e
s
s
fr
o
m
L
ig
h
tb
a
r
Red
CONNECT
TO +12 VDC
Rear Strobes
On/Off Switch
!