Star Headlight & Lantern ULB14 StarBurst Half Phantom Undercover - Manual (Page 2)

-2-
11. With the acorn nuts still slightly
loose, slide the light as close to
the front windshield as possible.
Once it is touching the window,
tighten the two acorn nuts that
secure the two brackets together.
10. Loosen the two Baffle Adjustment
Screws located on the bottom of
the light to allow the baffle to slide.
(Passenger’s side shown)
8. Install the angled "L" bracket over the
two studs on the visor bracket as
shown to the left. Secure it using two
#8 washers and two acorn nuts.
Note: You may want to leave the
acorn nuts slightly loose to allow for
easier final adjustments.
(Passenger’s side shown).
9. Attach the light to the "L" bracket using
the two stud brackets. Secure the light
using two #8 washers and acorn nuts as
shown to the left. Note: You may want
to leave the acorn nuts slightly loose to
allow for easier final adjustments.
7. Tighten the screws on the visor arm to
hold the visor bracket and light in
place. (Passenger’s side shown)
6. Replace and tighten visor clip to secure
the visor bracket to your vehicle.
(Passenger’s side shown)
13. Repeat installation for the opposite side of the vehicle (Split Phantom only).