Star Headlight & Lantern ULB44 The StarBurst Phantom Undercover - Manual (Page 3)

-2-
These lights are designed to
be mounted in the front
windshield of a vehicle using
the pre-existing visor clips.
Mounting (CONT'D)
P30073-4 (QTY=4)
#8 FLAT WASHERS
2. Insert a carriage bolt through one of the
1/4” washers and slide it through the back
of each of the long L-brackets. Please
note that washer is used as a spacer on
the square neck of the carriage bolt.
3. Remove the four of the #8 Phillips head screws shown to the
right from the light and add the # 8 washers. Use them to
install the long L-brackets.
CAUTION: Take extreme caution not to over
tighten the screws!!!
4. Attach a forked bracket to each
L-bracket using one of the nuts.
Note: There are two different style
forked brackets included. Use the
one that suits your application
best.
Leave the nut slightly loose to
allow for minor adjustments during
the remainder of the installation.
1. Slide the enclosed rubber
channel over the front edge
of the baffle .