StorCase Technology DE110 - Manual (Page 20)

PATA DE110 User's Guide - Rev. C03 StorCase Technology, Inc.
Installation 13
Unit ID Select Switch Settings
The following table lists the Unit ID Select Switch settings and the valid AT/IDE unit numbers.
Please note that all invalid switch settings have X's through them and result in a blank display
in the receiving frame display window.
Table 1: Unit ID Select Switch Settings
NOTE: The unit ID number display is for ID display purposes only (when using the
Drive Select Method). The Master/Slave setting must still be set on the drive
itself (refer to page 7 of this User's Guide for further information).
Figure 9: Unit ID Select Switch Location
Drive Carrier
Guide
Typical Data Express
Receiving Frame
0087a
Unit ID Select
Rotating Switch
Unit ID Select
Position
Unit ID Number
Display
Drive
Selection
0 5 4 3 2 1 8 7 6 9
0
Master Slave Master Slave
Blank 1 Blank Blank 2 3 Blank Blank Blank
824b