StorCase Technology DE200i-SWC160 - Manual (Page 33)

26 Appendix D - Field-Replacing the Carrier Fans
StorCase Technology, Inc. DE200i-SWC160 User's Guide - Rev. B01
Appendix D - Field-Replacing the Carrier Fans
Figure D-1: Removing the Fan Bracket from the Carrier
The DE200i-SWC160 drive carrier contains two (2) front-mounted drive carrier fans for
enhanced heat dissipation. Should the fans ever fail, the unit ID number indicator (located on
the front of the receiving frame) will display a flashing "F" and an audible alarm will sound. Refer
to section "Receiving Frame (Front)" for further information.
In the case of failure, both fans are easily field-replaceable as outlined in the steps below.
NOTE: A #2 Phillips screwdriver will be required during this procedure.
While performing steps in this section, work on a soft surface to prevent excessive
shock to the drive and carrier.
Drive
Carrier
0179g
Fan
Bracket
#6-32 Phillips
Flat Head Screw
(3 Places)
Power
Cables
Fan 2 Fan 1