StorCase Technology DS550 - Manual (Page 21)

Installation 13
DS550 User's Guide - Rev. A04 StorCase Technology, Inc.
Device Filler Panel
(back side)
Flat Side of Connector
Faces Up
0581
To 2mm Device
Connector
Figure 9: Installing the LEDs into the Filler Panel
Figure 10: Removing the Filler Panel
2. For front-loading devices: Remove the appropriate filler panels from the DS550.
Apply a small amount of pressure with the tip of a flat blade screwdriver to the filler
panel clips located on the side of the drive mounting bracket (Figure 10).
Drive Installation
1. For fixed media devices: Install the drive activity and drive fault LEDs into the appro-
priate front filler panels. Gently push each LED into the rear of the filler panel (Figure
9).
550_15
Press in these Cutouts to Remove
the Appropriate Filler Panel
Drive Filler
Panel
Drive Mounting
Bracket