StorCase Technology DCW4RAID-KIT - Manual (Page 2)

D89-0000-0108 Rev. A00 StorCase Technology Inc.
2 RAID Cable Kit
5. Remove existing chassis rear panel connector(s) if necessary. Save mount-
ing screws, these will be used later in Step 7.
6. Connect Drive Channel Cable (for channel 0) to the appropriate drives and to
Drive Channel 0 on the RAID controller. Connect Drive Channel Cable (for
channel 1) to the appropriate drives and to Drive Channel 1 on the RAID
controller (see figure below).
7. Attach the VHDCI adapter plate to the Data Silo rear panel with the same two
(2) screws from Step 5 and connect the cable to the host channel on the RAID
controller.
8. Reinstall the Data Silo covers and any cables removed earlier.