Drive installation – StorCase Technology DS90 User Manual

Page 15

Advertising
background image

Installation

9

DS90 User's Guide - Rev. C00

Kingston Technology Company

Drive Installation

1.

Remove the drive bracket from the DS90 as shown in Figure 8.

•

Remove the ground wire if it is already attached to the bracket using a
Phillips screwdriver.

•

Push down on the release button, located directly behind the bracket.

•

While holding the button down, slide the bracket towards the rear of the
chassis and lift the bracket out.

Figure 8: Removing the Drive Mounting Bracket from the DS90 Chassis

PUSH

2

3

0216

Remove
Ground Wire
(if attached)

1

View from Rear of DS90

Advertising