StorCase Technology InfoStation 12-Bay 4U Ultra320/SATA User Manual
Page 54
InfoStation 12-Bay RAID User's Guide - Rev. D00
StorCase Technology, Inc.
RAID Controller Configuration
41
g.
Arrow down and select NVRAM. Press <ENTER>.
Select Update NVRAM and press <ENTER>.
Select Yes and press <ENTER>.
Arrow down and select Restart. Press <ENTER>.
Select Yes and press <ENTER>.
4.
Controller will now reboot and the RAID x array will start initialization.
NOTE:
Initialization may take several hours, depending on the overall capa-
city of the array being configured.
5.
For additional arrays, repeat Steps 1-3.
6.
Once setup is complete:
• If multiple partitions are required, proceed to section "Partitions" on page 42 of
this User's Guide.
• If no additional partitions are required, proceed to section "LUN Mapping" on
page 46 of this User's Guide.