StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 23)

18 Installation
StorCase Technology, Inc. InfoStation Installation Guide - Rev. C01
3. Once the battery cover is removed, unplug the battery cable from the RAID module
(Figure 17).
4. Carefully turn the RAID Module over to access the two (2) screws securing the battery
bracket to the module (Figure 18). Loosen and remove the screws. The bracket and
battery should now drop out when the RAID Module is lifted.
Figure 17: Unplugging the Battery from the RAID Module
IFS_74
3-Cell
NiMH
Battery
Battery
Cable
Disconnect
Cable Here
5. Replace battery and install by simply reversing the above mentioned steps. MAKE
SURE THAT THE BATTERY IS INSTALLED CORRECTLY!
CAUTION: Danger of explosion if the battery is incorrectly replaced! Replace
only with the same or equivalent type recommended by the manufac-
turer. Dispose of used batteries according to the manufacturer's
instructions.