StorCase Technology 14-Bay 4U SCSI Ultra320 - Manual (Page 40)

InfoStation 14-Bay U320 User's Guide - Rev. A00 StorCase Technology, Inc.
SCSI Channel Configurations 31
SCSI CHANNEL CONFIGURATIONS
Termination of the SCSI Bus at the VHDCI Connectors
Ultra320 I/O Repeater Module
CAUTION: VHDCI connectors are easily damaged by improper handling. Visually
inspect each connector for bent contacts and carefully align prior to
insertion.
NOTES: Port-A (In) connects to SCSI Host/Disk Channel.
Port A (Out) connects to a terminator or daisy-chained to another Info-
Station chassis or SCSI device.
For SCSI Ultra320 operation, the InfoStation requires Ultra320 drives,
Ultra320 HBA, Ultra320-compliant cabling (internal and external), and
Ultra320 repeater modules installed.
For daisy-chaining applications, total device-to-host cable length must not
exceed 12m (approx. 39ft) per SCSI specifications.
Figure 6: InfoStation VHDCI Connectors
(Ultra320 I/O Repeater Module)
I/O Repeater Module LEDs
Error LED (Amber) - Flashing indicates a detection in either:
1. Over temperature
2. Low termination voltage
3. Invalid differential voltage
Activity LED (Green) - ON indicates that activity is present.
OFF indicates that there is no activity present.
IFS14_1
Error Activity
SCSI LVD/SE
ULTRA320
PORT A (IN) PORT A (OUT)