StorCase Technology FC-to-SCSI Single & Dual RAID User Manual
Page 45
Advertising

32
Configuration
StorCase Technology, Inc.
FC-SCSI Dual RAID Module User's Guide - Rev. A01
6.
Enter the number of drives (excluding spares) to be used in the array and press Enter.
The Select Drives screen should now display (Figure 17).
Figure 16: Number of Drives Screen
7.
Select the drives to be used for the array and press Enter.
A drive is selected by highlighting it and then pressing Enter. Each selected drive turns
gray in the drive list. To skip a drive, use the é or ê key.
If the array is mirrored, RAID 3, RAID 4, RAID 5, or RAID 50 and there are one or more
drives left, the Number of Spares screen will display.
Figure 17: Select Drives Screen
Advertising