Taser X26P - Manual (Page 13)

13 Chapter 3 Features
Critical Fault indication. A yellow stop sign in the upper-right side of the CID
indicates a system failure. The ECD is NOT to be used.
Do NOT attempt to use the ECD. Contact TASER International customer service.
Invalid Battery Pack. If you see a blinking exclamation point and battery icon, this
indicates that the ECD did not recognize the battery correctly. Remove the battery
pack and reinsert it. If the error is still present, try another battery pack. If the icon
still displays, the ECD should be sent in for service if it is still under warranty.
An APPM battery pack is installed in the ECD.
A TASER® CAM™ HD recorder is installed in the ECD.
A TASER CAM HD recorder with the automatic shut-down feature is installed in the
ECD. This recorder offers an audio warning and shut-down feature like that of an
APPM battery pack.
The USB connection status icon displays when the USB connection is good.
Battery Level Icons
When the safety switch is in the up (ARMED) position, the CID will display the percentage of battery power
remaining. Remaining capacity will display in 19 percent increments.
When the battery level drops to 20 percent, TASER International recommends that the battery pack be replaced.
Battery
81– 100%
Battery
61– 80%
Battery
41– 60%
Battery
21– 40%
When the battery capacity is at 1–20 percent, the CID will flash the
warning LO BATT on the CID when the safety switch is cycled to the
up (ARMED) position.