Semi-permanent installation – DeLonghi PAC-A130HPE User Manual

Page 3

Advertising
background image

134

5,27

in.

in the win-
dow pane

in the wall: it is
recommended
that you insulate
a section of the
wall using suit-
able insulation.

in the wooden
kickboard of
a French win-
dow

F

Semi-permanent installation

MAX100 cm
MAX 39,37 inches

MIN 35 cm
MIN 13,77 inches

SEMI-PERMANENT INSTALLATION

If required, your appliance can also be
installed semi-permanently (Fig. E).

Proceed as follows:

Drill a hole ø 5,25 inches (ø 134 mm) in an
outside wall or through a window pane.
Respect the dimensions and height of the
hole given in figure F and G.

Fit the wall flange

into the hole.

Fit the air exhaust hose

into the air

exhaust hose housing

located on the

rear side of the appliance (fig. A page 5).

Fit the end of the hose

to the wall

flange

as shown in fig. G.

8

11

12

12

11

G

When the hose

is not connected, the

drilled hole can be closed with the flange
cap .

NOTE: When installing the air conditioner
semi-permanently, you should leave a door
slightly open as little as 1/2 “ (1 cm) to guar-
antee correct ventilation and room pressure.

11

12

6

11,8 in
30 cm

11,8 in
30 cm

E

Keep the exhaust hose as short and free
of curves as possible to avoid constric-
tions.

“As special tools are required for installa-
tion, we suggest you have the applian-
ce installed by specialized personnel.”

Advertising