TFC Group Talento 892 Plus - Manual (Page 34)

EN
out
prog
in
RS232
TAXXI
77
• A taxxi module can be used to exchange pro-
grams via the IR interface To do so, the device
must be in the TAXIMODE and connected to
power
• Press ESC to finish the TAXIMODE
Taxxi Mode
Operation of taxxi module:
1 Press PROG to select the program number
2 Press IN to read in a program
Press OUT to read out a program
3 Hold the taxxi module vertically over the IR
interface
4 Pressing IN or OUT again will start the
transmission
A wrong transmission is shown by Er2
For further information, see the separate
operating manual "talento taxxi plus"