Ubiquiti Networks airFibe24 - Manual (Page 40)

37
Chapter 10: Tools airFiber ® AF24 User Guide
Ubiquiti Networks, Inc.
Chapter 10: Tools
Each tab of the airFiber Configuration Interface contains
network administration and monitoring tools. Click the
Tools drop‑down list at the top right corner of the page.
Align Antenna
Use the Align Antenna tool to point and optimize the
antenna in the direction of maximum link signal. (See
“Using the airFiber Configuration Interface” on page
12 for more details.) The Antenna Alignment window
reloads every 250 milliseconds.
Chain 0/1 Signal Strength Displays the absolute power
level (in dBm) of the received signal for each chain.
Changing the RX Gain on the Wireless tab does not affect
the Signal Strength values displayed on the Antenna
Alignment window. However, if “Overload” is displayed to
indicate overload condition, decrease the RX Gain. See “RX
Gain” on page 24 for more details about RX Gain and
overload condition.
Remote Chain 0/1 Signal Strength Displays the absolute
power level (in dBm) of the received signal for each chain
of the remote airFiber radio.
Max Signal Displays the maximum signal strength (in
dBm). To adjust the range of the Max Signal meter, use
the slider or manually enter the new value. If you reduce
the range, the color change will be more sensitive to
signal fluctuations, indicating the offset of the maximum
indicator value and the scale itself.