Ubiquiti Networks NanoBridgM - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™
NanoBridge ™ . This Quick Start Guide is designed to guide
you through the installation and show you how to access
the airOS
™ Configuration Interface. This Quick Start Guide
also includes the warranty terms and is for use with the
NanoBridge, models NBM3, NBM365, and NBM900.
Package Contents
or or
Dish Reflector NanoBridge
M3/M365
or NanoBridge
M900
M3/M365 Feed
Support Tube
or M900 Feed
Support Tube
10 10
Dish Bracket Mounting
Bracket
Pole Clamps
(Qty. 2)
U-Bolt
(M8, Qty. 2)
M8x50
Carriage Bolt
M8x15 Carriage
Bolts (Qty. 4)
M8 Flange Nuts
(Qty. 9)
M6x15
Carriage Bolt
M6x12 Carriage
Bolts (Qty. 4)
High-Performance airMAX™ Bridge
Model: NBM3/NBM365/NBM900
M6 Flange Nut
(Qty. 5)
Plastic Straps
(Qty. 2)
PoE Adapter
(24V, 0.5A)
Power Cord Quick Start
Guide
Products may be different from pictures and are subject to change without notice.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.