Ubiquiti Networks NanoBridgM - Manual (Page 7)

Installation Requirements
• 10 mm wrench
• 13 mm wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Using the Correct Feed Support Tube
The NanoBridgeM3/M365 and NanoBridgeM900 require
different Feed Support Tubes, which are not interchangeable.
Ensure that you are using the correct Feed Support Tube for
your NanoBridge model before you begin installation.
NBM3/M365 Feed Support Tube NBM900 Feed Support Tube