Ubiquiti Networks PowerBridgM10 - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™
PowerBridge ™ M. This Quick Start Guide is designed to guide
you through the installation, and show you how to access
the airOS
™ Configuration Interface. This Quick Start Guide
also includes the warranty terms and is for use with the
PowerBridgeM10, model PBM10.
Package Contents
Radio Dish Feed Mounting
Bracket
Pole Clamps
(Qty. 2)
Stabilizer Brackets
(Qty. 2)
Elevation
Rod
M10x150 Bolts
(Qty. 4)
M10x100 Bolts
(Qty. 2)
M10x25 Bolts
(Qty. 3)
O-Ring
(Installed on feed)
M4x12 Screw and
Washer Assembly
(Qty. 4)
M4x18 Screw and
Washer Assembly
(Qty. 4)
M10 Hex Nuts
(Qty. 9)
M16 Hex Nuts
(Qty. 2)
M10 Washers
(Qty. 9)
M16 Washers
(Qty. 2)
10 GHz Carrier Class airMAX BaseStation with Dish Antenna
Model: PBM 10
M10 Washers
(Qty. 9)
M16 Washers
(Qty. 2)
PoE Adapter
(24V, 1A)
Power Cord Quick Start
Guide
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.