Ubiquiti Networks UniF AP - Manual (Page 5)

Ports
Main/48V
Ethernet Port
Secondary
Ethernet Port
Reset Button
Cable Feed Plug
Main/48V This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN and DHCP server.
Power can be provided by any of the following:
• Included PoE GigE Adapter
• 48V, 802.3af compliant switch
• Ubiquiti Networks TOUGHSwitch
™ PRO, model TS‑8‑PRO
• Ubiquiti Networks EdgeRouter ™ PoE, model ERPoe‑5
Secondary This Gigabit Ethernet port is used for bridging.
Reset This button serves two functions for the UniFi AP‑PRO:
• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the
Reset button for more then five seconds.
Cable Feed Plug If your Ethernet cable feeds along the
mounting surface, remove the Cable Feed Plug.
Locking
Clip
Mounting
Bracket
Locking Clip During installation, the Locking Clip on
the Mounting Bracket locks into the Locking Notch on the
UniFi AP-PRO to help prevent theft.