VDO WR X2 - Manual (Page 161)

X2 VDO CYCLECOMPUTING 18
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X2 19
6. Terms of guarantee
Please contact the dealer from whom you purchased
the device for all complaints and guarantee claims.
Or send your complaint directly to:
Cycle Parts GmbH
Große Ahlmühle 33
D-76865 Rohrbach (Germany)
We would be pleased to answer any technical
questions you might have at the following
hotline number: +49 (0) 63 49 - 96 35 - 10.
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in
the course of further development.
VDO Cycle Parts grants a guarantee of 5 years
from the date of purchase for your VDO computer.
The guarantee covers material and processing
defects on the computer itself, on the sensor/
transmitter and on the handlebar holder. Cables
and batteries as well as assembly materials are
excluded from the guarantee. The guarantee is
only valid if the parts concerned have not been
opened (exception: battery compartment on the
computer), no force has been used and there is
no sign of wilful damage. Please take care to keep
the receipt as it must be presented in the event
of a complaint.If the complaint is justified, you
will receive a comparable replacement appliance
from us. You are not entitled to an identical
replacement model if the model in question is no
longer in production due to a change of model.
7. Technical spezifications
Computer:
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Handlebar holder: weight: approx. 15 g
Sensor: weight approx. 20 g
Computer battery: 3V, type 2032
Battery life-span:
1200 cycling hours, approx. 24,000 km (15.000 m)
Working temperature of the display:
-15 °C to +60 °C
Speed range:
for wheel size 2155 mm, min 2.5 km/h, max 199.5 km/h
Ride time measurement range:
up to 23:59:59 HH:MM:SS Stopwatch measurement range:
up to 23:59:59 HH:MM:SS
Day‘s trip counter measurement range:
up to 999.99 km or mi
Navigator measurement range:
up to 999.99 km or mi
Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi
Wheel circumference setting range:
from 100 mm to 3999 mm (3.9 to 157.4 inches)
8. Troubleshooting
Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause Correction
Half segments on the display
(e.g. after a battery change) Computer software not running
correctly after battery change Take out battery and insert
again
No speed display Distance from sensor to
magnet too big Correct position of sensor
and magnet
No speed display Computer not properly clicked
in the handlebar holder Place computer head in the
handlebar holder, twist until
it clicks
No speed display Wheel circumference is not
correctly set or is at zero Set wheel circumference
Display becomes weak Battery dead Check battery, replace if nec.
Display becomes weak Temperatures under 5° make
the display sluggish At normal temperatures the
display will work normally
again