SoundMax SM-CDM1050 - Manual (Page 14)

14
Menu Function
Press the POWER button to turn the unit on, the display will show a message to indicate
it is ready to use. Press the BAND for the radio mode, press MODE to select between Aux, Radio
mode and CD/MP3 play. Press the POWER button again to turn the unit off.
VOLUME CONTROL
A. The volume level can be adjusted at any time by rotating the audio level VOL knob as select
mode has been initially defaulted at volume mode.
BASS CONTROL
A. Press the SEL button to select the bass mode until BAS appears on the display.
B. Press the VOL knob to adjust the bass effect.
TREBLE CONTROL
A. Press the SEL button to select the treble mode until TRE appears on the display.
B. Press the VOL knob to adjust the treble effect.
BALANCE CONTROL
A. Press the SEL button to select the balance mode until BAL appears on the display.
B. Press the VOL knob to increase or decrease the sound level of left or right speaker.
FADER CONTROL
A. Press the SEL button to select the fader mode until FAD appears on the display.
B. Press the VOL knob to increase or decrease the sound level of front or rear speaker.
BEEP ON/OFF mode
Press SEL button for 2 seconds, the display will show DSP OFF.
Press the SEL button continuously until the display show BEEP ON, press the volume up/down
button to toggle between it and BEEP OFF, then leave the unit idle for your desired setting to
take effect.