SoundMax SM-CDM1050 - Manual (Page 15)

15
LOUD mode
Press the LUD to emphasize the Bass output, the word LOUD ON shows on the display indicates
that the loudness function is on. Press again to cancel.
Time clock setting
The time clock can be set anytime when the power is on.
Press the CLK button and then press and hold CLK button for 3 seconds, the time will blink on
the display.
1. Rotate the volume knob clockwise to adjust the hour.
2. Rotate the volume knob anti-clockwise to adjust the minute.
3. Press the CLK button again or left the unit idle for new setting to effect.
Press the CLK button anytime to view the time clock display.
DSP mode
Press and hold the SEL button for 2 seconds, the display will show DSP OFF. Press the volume
up/down button to choose EQ effect.
POP ROCK CLASSIC FLAT DSP OFF
After you have reached your desired effect, leave the unit idle in order for the new setting to
take effect.
Choose Radio Band
Press the BAND button to operate the radio function. (Even when CD is playing)
Total 3 sets of FM Band (FM1, FM2)
Total2 sets or MW Band (MW1, MW2)
Each set of the band can be stored up to 6 preset stations, making total 30 preset memory
stations.