Voodoo Lab Pedal Power Digital - Manual (Page 7)

- 5 -
Strymon
All Strymon pedals (including the larger format Timeline) can be powered from
any of the 9V outputs using a standard black 5.5x2.1mm barrel cable.
Important: Strymon pedals should only be powered from the 9V outputs.
Attempting to power from a 12V output may permanently damage the pedal.
Don’t do it, we warned you!
TC Electronic
TC Electronic’s Nova pedals such as the Delay, Modulator and Reverb can be
powered from either the 9V or 12V outputs using a standard black 5.5x2.1mm
barrel cable. The 9V output does not match the rating of the supplied TC
Electronic adapter, but does correctly power these pedals.
Important: While you can power the Nova pedals from either 9V or 12V outputs,
do NOT operate two Nova pedals from the same isolated section by using both
9V and 12V jacks of the pair. This WILL exceed the 400mA current rating.
Other TC Electronic pedals which can be powered from a 9V battery, such as the
Classic and TonePrint series, can operate from any of the 9V outputs.
Eventide
The Eventide stompboxes (TimeFactor, ModFactor, PitchFactor and Space) can
be powered from either the 9V or the 12V outputs using the red 5.5x2.5mm
barrel cable. The 12V output does not match the rating of the supplied Eventide
adapter, but does correctly power these pedals.
Important: While you can power the Eventide stompboxes from either 9V or 12V
outputs, do NOT operate two Eventide pedals from the same isolated section by