Voodoo Lab Pedal Switcher - Manual (Page 8)

TUNER/MUTE SEND
Any one of the 4 audio loops can be used to send your signal to a tuner while muting the rest of
your setup. However, by placing the tuner in Loop 1, you’re able to send un-effected signal to
the tuner.
NOTE: The last thing you’d want to do is have your tuner in the last loop. This means that you
might end up with chorus or delay on the signal. You’ll be trying to tune for days!
As you can see from the example above, by not returning the signal back into the Pedal Switcher,
you’ve now broken the audio path, thus muting all sound post your tuner.
Important: Pedal Switcher audio loops are all hard-wired together in series. This means that if
you engage a loop that doesn’t have anything plugged into it, you’ll break the audio path and no
audio will pass!
POWER
BUFFER 9VAC MIDI IN MIDI OUT RETURN 1 SEND 1 RETURN 2 SEND 2 RETURN 3 SEND 3 SEND 4 INSERT OUTPUT RETURN 4 INPUT
MADE IN
U.S.A.
IN
TUNER
IN OUT
DIST.
IN OUT
CHORUS
IN OUT
DELAY
AMP
6