Voodoo Lab MX-28M - Manual

USER INFORMATION
MX-28M MIDI PATCHBAY/MERGER PLUS
The MX-28M MIDI Patchbay is an ideal routing system for small systems, or expander
unit for medium to large sized systems. In addition, the MX-28M provides Merging,
Transposition and Note Mapping functions to help you create exactly the sounds and
effects you want.
When you open the carton, check to make sure you have the following:
1. MX-28M
2. Power Adapter
3. Warranty Card
Please take a moment to fill in and mail the warranty card now.
INSTALLATION
Connect your MIDI cables as follows:
MX-28M Inputs
Route the OUTPUT from one “source” (e.g. your controller keyboard) to one of the
INPUTS on the MX-28M. Route the OUTPUT from another “source” (e.g. your
sequencer) to the other input on the MX-28M.
MX-28M Outputs
Route each of the eight MX-28M OUTPUTS to the INPUTS of your tone modules,
sequencer, etc. (the “destinations” for your MIDI data).
Plug the Power Adapter into a suitable wall outlet. Plug the Power Adapter connector
into the power jack on the MX-28M.
ROUTING
For each MX-28M OUTPUT, use the corresponding three-position switch to select either
INPUT 1, INPUT 2 or the PROCESSOR as the source for that OUTPUT.
PROCESSING
The MX-28M is extremely easy to program. Transpose intervals and map zones are
selected directly from your controller keyboard connected to INPUT 1.
Select one of the three processing functions with the three-position Function Select
Switch. Processed data can be assigned to any OUTPUT(s), and each of the INPUTS can
still be assigned individually.