Main mounting bracket and plate, cont'd – Vortech 1993-1996 5.2L Grand Cherokee User Manual

Page 10

Advertising
background image

C. Please note that the 3-3/4" bolt also holds

the supercharger mounting plate. This
fastener must be threaded into its hole
loosely as a pilot while securing the cast
bracket with the other two, then removed
for installation of the supercharger
mounting plate. Reinstall the bolt after
mounting the plate and before attaching
the spring tensioner.

D. Attach the stock belt tensioner to the front

of the supercharger mounting plate as
shown. Make sure the indexing tab is
engaged in the slot.

E. Secure the plate and tensioner as an

assembly to the cast bracket.

F. Attach the support strut between the

supercharger mounting plate and the
second exhaust manifold stud. Secure with
the supplied stainless steel bolt.

G. Attach the 3 loose ground connections

from the main harness (near the
supercharger mounting bracket) to the
existing alternator mounting bolt and
secure.

ATTACH TO
EXHAUST MANIFOLD

3/8-16 X 1.0

3/8-16 X 3.0

3/8-16 X 1.0

3/8-16 X 3.0

3/8-16 X 3.75

GEARCHARGER
MOUNTING PLATE

MAIN MOUNTING
BRACKET

SUPPORT

STOCK TENSIONER

5/16-18 X 3.5

3/8-16 x 1"

3/8-16 x 3"

3/8-16 x 3-3/4"

3/8-16 x 3"

3/8-16 x 1"

5/16-18 x 4-1/2"

SUPERCHARGER
MOUNTING PLATE

MAIN
HARNESS

GROUND TO ALTERNATOR
MOUNTING BOLT

3/8-16 x 3-3/4" -
(BOLT MUST BE
INSTALLED BEFORE
SPRING TENSIONER
IS MOUNTED.)

4

5. MAIN MOUNTING BRACKET AND PLATE, cont'd.

EXHAUST

MANIFOLD

.60 SPACER

5/16" BOLT

HEAT
SHIELD

.25 SPACER

VORTECH
SUPPORT

Advertising