Vortech 1999-2006 4.8L/5.3L/6.0L Light Truck/SUV - Manual (Page 24)

P/N: 4GL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
08OCT08 v5.0(99-07 GM Trk (4GLv5.0))
14
Fig. 11-b
11 RADIATOR TUBE InSTALLATIOn
A. Cut the supplied hose as shown in Fig. 11-
a.
B. Using the two original clamps and the two
supplied #24 hose clamps, attach the previ-
ously trimmed hose pieces to each end of
the supplied radiator tube, radiator and water
pump. (See Figs. 11-a, 11-b.)
C. Orient the radiator tube and hoses for best fit
and tighten all clamps.
D. Use the supplied adel clamp and 1/4-20 x 1/2”
screw and washer to secure the radiator tube
to the insert on the large plastic inlet duct.
(See Fig. 11-b.)
E. Refill the coolant reservoir.
2” PIECE TRIMMED FROM
SUPPLIED HOSE
Fig. 11-a
TO SUPPLIED RADIATOR TUBE
(TRIM FOR BEST FIT)
TO WATER
PUMP