Discharge duct installation – Vortech 1999-2006 4.8L/5.3L/6.0L Light Truck/SUV User Manual
Page 25
Advertising
P/N: 4GL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
08OCT08 v5.0(99-07 GM Trk (4GLv5.0))
15
Fig. 12-a
12. DISCHARGE DUCT InSTALLATIOn
A. Install the supplied 2-3/4” sleeve and rubber
elbow onto the cast discharge duct. Put the
discharge duct into position and slide the
sleeves onto the supercharger and the throttle
body.
B. Install and tighten the #64, #48 and the two
#44 hose clamps.
NOTE: This section only applies to standard
output kits.
Advertising