Engineering, llc – Vortech 1996-2000 4.3L Truck/SUV User Manual

Page 20

Advertising
background image

P/N: 4GD020-010
©2001 Vortech Engineering, LLC
All Rights Reserved. Intl. Copr. Secured
26APR01 V1.2

(4.3L V-6/S-10-(4GD))

12. FINAL REASSEMBLY AND CHECK

A. If your vehicle has gone over 10,000 miles since its last

spark plug change, you will need to change the spark
plugs now before test driving the vehicle.

B. Check all fittings, nuts, bolts and clamps for tightness.

Pay particular attention to oil and fuel lines around
moving parts, sharp edges and exhaust system parts.
Make sure all wires and lines are properly secured with
clamps or tie wraps.

C. Check all fluid levels, making sure that your tank(s) is/

are filled with 92 octane or higher fuel before
commencing test drive.

D. Start engine and allow to idle a few minutes, then shut

off.

E. Recheck to be sure that no hoses, wires, etc. are near

exhaust headers or moving parts and for signs of any
fluid leakage.

F. PLEASE TAKE SPECIAL NOTE: Operating the vehicle

without all sub assemblies completely and properly
installed and working may cause FAILURE OF MAJOR
ENGINE COMPONENTS.

G. Test drive the vehicle.
H. Read the STREET SUPERCHARGER SYSTEM OWNER'S

MANUAL AND RETURN THE WARRANTY
REGISTRATION FORM
within thirty (30) days of
purchasing your supercharger system to qualify for the
3 year limited warranty.

14

WARNING:

Do not attempt to operate the vehicle un-
til ALL components are installed and ALL
operations are completed including the
final check.

Figt 12-a

ENGINEERING, LLC

1650 PACIFIC AVENUE • CHANNEL ISLANDS, CA 93033-9901 • (805) 247-0226

FAX (805) 247-0669 • www.vortechsuperchargers.com • M-F 8:00 AM - 4:30 PM PST

®

Advertising