Vortech 1992-1996 5.7L LT1 Corvette User Manual
Page 33
23. FINAL ASSEMBLY AND CHECK (cont'd.)
23
®
ENGINEERING, INC.
© 1997 VORTECH
®
ENGINEERING, INC. all rights reserved
H. Start the engine and bleed the cooling
system at the water neck until a steady
stream of coolant comes out of the
fitting. Retighten the bleed screw.
I.
Recheck to be sure that no hoses,
wires, etc. are near exhaust headers or
moving parts and for signs of any fluid
leakage. Check ignition timing to make
sure it is set to stock specifications
before commencing test drive.
J. Test drive the vehicle.
K. Recheck the coolant and oil level.
L. Read the STREET
SUPERCHARGER SYSTEM
OWNER'S MANUAL AND
WARRANTY REGISTRATION FORM
within thirty (30) days of purchasing
your supercharger system to qualify.
NOTE: Operating the vehicle without ALL
the subassemblies completely and
properly installed may cause FAILURE
OF MAJOR COMPONENTS.
WARNING: Do not attempt to operate the
vehicle until ALL components are
installed and ALL operations are
completed including final check.