Vortech 2003-2006 G35 - Manual (Page 21)

P/N: 4NZ020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
04JUN08 v6.0 Nissan 350Z(4NZv6.0)
3
A. Remove the oil pressure sending unit located in front
of the oil filter.
b. Using engine oil on the threads, install the adapter
into the engine block. Install the TEE into the adapt-
er and tighten. Reinstall the sending unit into the
TEE. Install 1/8"NPT to #4 90° fitting onto the TEE
and point it toward the driver’s side of the vehicle.
(See Fig. 3-a.)
C. Install a new filter and refill with fresh oil.
3. OIL FEED LINE INSTALLATION
Fig. 3-a
(Engine oil-fed kits only. Applications with V-3 Superchargers skip ahead to step 4)