Vortech 1993-1997 5.7L LT1 F-Body - Manual (Page 11)

4. Water Tank Mounting
E. The open (top) end of the 1-1/4” filler hose
will need to be trimmed 2-1/2” shorter so that
when the hose adapter and cap are installed,
the cap is near level with the top of the radiator
core support. Insert the supplied aluminum
hose adapter into the open end of the long 1-
1/4” tank filler hose (this hose should have
been previously routed up into the engine com-
partment) and secure with the supplied #20
clamp. If necessary, slightly rotate the filler
hose assembly so that the aluminum hose
adapter is up against the rear of the upper core
support (see photo - 7). Secure the assembly
to the radiator core support using the supplied
adel clamp and sheetmetal screw.
Photo - 7
6
(continued)
Filler hose
and cap
Feed hose
from water pump
(see step 6)
Return hose
to top of tank
© 2000 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
31JAN00 V 1.0