Waldorf 2-Pole - Manual (Page 11)

Setup and Connection
11 2-pole Analog Filter User´s Manual
Setup and Connection
Package Contents
The Waldorf 2-pole Filter package comes complete with:
• the Waldorf 2-pole Filter module
• an external power supply (DC 12V / 500mA)
• a printed quick start guide with use cases
w
You can also download additional material and
software here: www.waldorfmusic.com
Please ensure all the items above are included. If some-
thing is missing, contact your local dealer.
We recommend that you keep the original packing mate-
rial for future transport.
Connections
In order to get started with your 2-pole Analog Filter, you
will need an AC power outlet. For the connection of the
audio output, you will need either a mixing console or an
audio interface.
+
To connect the devices:
1. Turn all units off.
2. Connect the 2-pole Filter´s audio output 6 to
your mixing console or your computer audio in-
terface. The output provides a line level signal.
3. Connect the audio input 7 to an output of your
signal source. The audio input is suitable for line
level equipment (audio interface, CD player, syn-
thesizer, drum computer etc.) and high impe-
dance instruments (e.g. electric bass, electro
acoustic guitar).
4. If you want to control the 2-pole Filter via CV /
Gate signals (3, 4, 5), please connect them to
the CV / Gate outputs of your gear.
5. Switch on your setup and the 2-pole Analog Fil-
ter 1. Finally, switch on your amplifier or active
monitor speakers.