Waldorf 2-Pole - Manual (Page 12)

2-pole Analog Filter User´s Manual 12
w
If you do not choose to connect a mixing console,
you can patch the 2-pole Filter’s output signals di-
rectly to an amp or an audio interface. Use an in-
put usually called Line, Aux or Tape input.
m
Before connecting and disconnecting the 2-pole
Filter from a power supply source, turn your amp’s
volume control all the way down to avoid damage
due to on / off switching noise. The 2-pole Analog
Filter produces a high level output signal. Please
take care that the connected playback device is
suitable for the high level of an electronic instru-
ment. Never use the mic or phono input of the
connected amp!