Weston Non-Stick Single Hamburger Press User Manual

Single hamburger press, Instructions, Assembly

Advertising
background image

REV101409

SINGLE

HAMBURGER

PRESS

INSTRUCTIONS

MODEL #07-0301

1.

By holding on to the top of the

Hamburger Press, screw the Adjustment Plate and

Adjustment Screw into the top of Hamburger Press by turning clockwise until

approximately half the threads are showing on top of the

Hamburger Press.

2.

Re-thread the

Locking Wing Nut onto the Adjustment Screw. Pay special attention

not to cross-thread any parts when assembling.

3.

Screw the

Thickness Adjustment Knob clockwise onto Adjustment Screw until finger

tight.

ASSEMBLY

PATENTED

CLEANING & DISASSEMBLY

1.

Completely remove the

Thickness Adjustment Knob and the Locking Wing Nut from

the

Adjustment Screw by turning counter-clockwise.

2.

Hold on to the top of the

Hamburger Press and turning counter-clockwise,

unscrew the

Adjustment Plate and Adjustment Screw from the Hamburger

Press.

3.

Clean all parts in warm soapy water, then thoroughly dry.

ATTENTION

If any components of this unit are broken,

do not operate properly, or for product returns,

please contact Pragotrade LLC at

1-800-814-4895

Outside the U.S. call 440-638-3131.

For the online catalog, log onto

www.westonsupply.com.

Exclusively imported by Pragotrade LLC Strongsville, Ohio

www.pragotrade.com

LLC

u.s.a.

Advertising