Weston Non-Stick Single Hamburger Press - Manual (Page 2)

-2-
SINGLE
HAMBURGER PRESS
MODEL #07-0301
-3-
Clean the Hamburger Press thoroughly before each use.
TO SET THE DESIRED PATTY THICKNESS:
1. Adjust the Wing Nut all the way to the top of the Adjustment Screw by turning it
counter-clockwise.
2. Use the Weight Markings on the Shaft to measure the patty thickness. (The indication
line for the desired weight should be set to the edge on the top of the Hamburger Press.)
3. Hold on to the Thickness Adjustment Knob and turn the Adjustment Screw up or
down to reach the desired patty thickness.
4. Hold the Adjustment Screw in place and turn the Locking Wing Nut until it tightens
against the top of the Hamburger Press. CAUTION: DO NOT over-tighten the
Locking Wing Nut, damage to the threads may occur.
MAKING HAMBURGER PATTIES
Thickness Adjustment Knob
07-0302
Locking
Wing Nut
07-0303
Adjustment
Screw
Top of
Hamburger
Press
Adjustment
Plate & Screw
07-0304
Base
Plate
TO MAKE PATTIES:
1. Once the desired weight has been selected, place appropriate
amount of ground meat onto the Base of the Hamburger Press.
NOTE: When adjusting your patty weight, allow for 10% to 20%
shrinkage when fully cooked.
2. Close the Cover tightly until the excess meat bulges out of the
Hamburger Press.
3. Remove any excess meat from the outside of the Hamburger Press.
4. Open the Hamburger Press to reveal your perfectly made patty.
HELPFUL TIP: Place a piece of waxed patty paper under the
meat and another on top of the meat before closing the Hamburger
Press. This will make it easier to remove the patty. For best results,
meat should be between 36 O (2 O C) and 40 O F (4 O C).
5. Thoroughly clean & dry the Hamburger Press before storing.
PATENT
PENDING
Order Weston Brand Patty Paper
Model No. 10-0102
by visiting
westopnsupply.com
WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
Pragotrade LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance
with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be
free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Pragotrade LLC within 30 days
from purchase date for the warranty to apply. Failure to send the completely filled out Warranty Card, along with a copy
of the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Pragotrade LLC for warranty services, in either its
original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the
responsibility of the company. Pragotrade LLC charges a $35.00 per hour bench charge. NOTE: No repairs will be
started without the authorization of the customer. The return shipping cost to the customer will be added to the repair
invoice.
Pragotrade LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the company,
it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of purchase.
Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Pragotrade’s Customer Service at 1-800-814-4895 M-F 8am-5pm EST (outside of
the United States 440-638-3131) to obtain a Return Authorization Number (RMA Number). Pragotrade will refuse all
returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION
FROM PRAGOTRADE LLC.
LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is designed.
The product must not have been previously altered, repaired, or serviced by anyone else other than Pragotrade LLC.
If applicable, the serial number must not have been altered or removed. The product must not have been subjected
to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions
contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance,
improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including
warranty merchantability and fitness for a particular purpose, shall apply to this product. Under no circumstances shall
Pragotrade LLC be liable for consequential damages sustained in connection with said product and Pragotrade LLC
neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than
such as is expressly set forth herein. Any applicable implied warranties are also limited to the one (1) year period of
the limited warranty.
This warranty covers only the product and its specific parts, not the food or other products processed in it.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A
COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:
Pragotrade LLC
20365 Progress Drive, Strongsville, OH 44149
WARRANTY CARD
SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT
Customer Name: ________________________________
Address: ______________________________________
City/State/Zip: ___________________________________
Telephone Number: (_________) ___________________
E-Mail Address: ___________________________________
Original Date of Purchase: _______/_________/__________
Product Model #: __________________________________
Serial # (if applicable): ____________________________
If any components of this unit are broken or the unit does not operate
properly, call Pragotrade LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST.
Outside the U.S. call 440-638-3131