Pulp regulator settings, Assembly instructions, Tips for safe and easy operation – Weston Manual Wheatgrass Juicer User Manual

Page 4: About wheat grass juice, Cleaning instructions disassembly instructions

Advertising
background image

• By adjusting the

Pulp Regulator up and down, you can determine how much juice

is extracted from the pulp. This setting is a personal preference and results can be

determined during the early stages of using your

Wheat Grass Juicer for the first

time.

• MORE EXTRACTION: Turn the

Pulp Regulator clockwise to move the

Regulator down and apply more pressure to the wheat grass as it is being

squeezed, resulting in more juice.

• LESS EXTRACTION: Turn the

Pulp Regulator counter-clockwise to

move the

Regulator up and apply less pressure to the wheat grass as it is being

squeezed, resulting in less juice.

PULP REGULATOR SETTINGS

-4-

-5-

ASSEMBLY INSTRUCTIONS

1. Securely clamp the

Juicer Body to the edge of a table or counter top. Make sure

the

Rubber Foot Protector is positioned on the Juicer Body Foot to prevent

damage to the work surface. NOTE: The maximum recommended thickness of

the clamping surface should not exceed 1 ½”

2. Insert the

Screen completely into the Juicer Body.

3. Position the

Auger in the Grinder Body, so it rests on top of the Screen.

4. Position the

Auger Retainer on the Juicer Body, until the end of the Auger

protrudes from the middle of the Auger Retainer.

5. Secure the

Auger Retainer to the Juicer Body using the two Thumbscrews

with Cap Washers.
NOTE: Before securing, make sure the Rubber Seal is properly positioned

between the

Juicer Body and Auger Retainer.

6. Install the

Handle onto the end of the Auger, securing with the Handle

Thumbscrew with Cap Washer.

7. Screw the

Pulp Regulator onto the end of the Juicer Body.

• Always make sure the material you are juicing is completely free of any hard

material that may cause damage to the

Screen and Auger.

• Turn the

Handle at constant speed.

• Try to avoid starting and stopping the

Handle while juicing.

• If the

Juicer becomes jammed, and the Handle will not turn, briefly turn the Handle

counter-clockwise to remove jam. Resume normal operation.

• Do Not fill the

Juicer Body with more material than what you plan on using.

• Always make sure the

Juicer Body is securely attached to work surface before you

start juicing.

TIPS FOR SAFE AND EASY OPERATION

Health-conscious individuals term wheat grass as one of the so-called “green foods”

that is valued as a great source of natural nutrients. In juice form, wheat grass contains

70% Chlorophyll, which is often referred to as the blood of plant life and most closely

resembles the molecules of human red blood cells. Chlorophyll has been shown to

produce an unfavorable environment for bacterial growth in the body and therefore

effective in increasing the body resistance to illness.

WHEAT GRASS JUICE CAN ALSO:

• Help to reduce high blood pressure, as it cleanses the bloodstream.

• Enhances the white blood cell count, strengthening the immune system.

• Alleviates anemia, as the chlorophyll raises the hemoglobin level of the blood.

• Supplies laetrile, which selectively destroys cancerous cells without harming normal

cells.

• Rubbed into scalp, reduces dandruff and restores the normal color to hair.

• Used as a mouth wash, relieves toothache and sore throat, and helps prevent tooth

decay.

• Is one of the richest sources of vitamins A, B, and C. It is an excellent source of

calcium, iron, magnesium, phosphorus, potassium, sodium, sulfur, cobalt, zinc, and

protein.

ABOUT WHEAT GRASS JUICE

.

Before using for the first time, you must completely disassemble the

Juicer and

thoroughly clean all parts with hot water and dish detergent. Rinse with clean water

and dry thoroughly.

.

DO NOT clean in a dishwasher.

CLEANING INSTRUCTIONS

DISASSEMBLY INSTRUCTIONS

1. Remove the

Handle Thumbscrew with Cap Washer and remove the Handle from

the

Auger.

2. Completely remove the two

Thumbscrews with Cap Washers and take off the

Auger Retainer.

3. Remove the

Auger from the Juicer Body.

4. Slide the

Screen out from the Juicer Body.

5. Turning counter-clockwise, remove the

Pulp Regulator.

6. Remove the

Rubber Foot Protector.

Advertising