Wisdom Audio Sage Series C38 - Manual (Page 9)

9
range of tilt angles, in order to accommodate different placement heights. This
is a one-time adjustment performed by the installer, the goal of which is to aim
the speaker at the listeners despite the possibility that the speaker itself may be
somewhat above or below ear level.
To adjust the vertical angle of the speake r, loosen the two Philips head screws
flanking the center post, slide the post up or down to achieve the right angle,
and retighten the screws.
The bottom of the post and the front bottom corners of the loudspeaker have
non-marring soft plastic “feet” designed to provide stable, three-point support.