Wisdom Audio DCAB-1 - Manual (Page 11)

11
Front Panel
1 Infrared Transceiver LEDs
The DCAB-1 supports two-way communication between its remote con-
trol and the unit itself. The lens for this infrared (IR) communication is in
one of the DCAB-1’s front feet. This lens must have a clean line of sight to
the remote control if you want to use it.
In normal, day-to-day operation, you should not have to do anything to
your DCAB-1 after it has been properly set up. It is truly a “set it and forget
it” component that simply optimizes the performance of your speaker
system in your room.
However, we have found that some of our customers like to fine-tune one
or two parameters a bit to compensate for overly “warm” or overly “dry”
recordings. The best parameter for this is the Q
b
control, which makes
the system sound slightly more “full” or “lean” in the bass. Having the
two-way remote control for these sort of on-the-fly minor adjustments is a
wonderful convenience.