Wisdom Audio DCAB-1 - Manual (Page 16)

16
Remote Control
Your Wisdom Audio DCAB-1 comes with a remote control that communicates
with the Brain bidirectionally. That is, unlike most remote controls, this one
sends instructions to and receives information back from the main unit.
This deceptively simply remote control actually provides access to everything
that the DCAB-1 can do. Every adjustment that can be made with the computer
connected to the RS232 port can also be made with the remote control.
The major limitation of the remote control lies in the size of its LCD display. It
can show you only one parameter at a time, for a single speaker. Pressing the
MENU ▲ button moves “up” in the same way that pressing the arrow-up button
on your computer moves you “up” in the list of parameters. Similarly, pressing
the
MENU ▼ button moves you “down” in the list.
The display on the remote will show you which parameter is active at each step
along the way. But unless your memory of the layout of the on-screen display
from your laptop is extraordinary, you are probably best off making only minor
changes with the remote control.
As a quick reference, you can use the screen shot below as a map, to refresh
your memory of how the cursor scrolls through the many parameters available
in the DCAB-1. (Ignore the specific values contained in this screen shot. They
are meaningless initial values.)