Wyred 4 Sound DSDse Pure - Manual (Page 2)

2. Next, you will need to configure the output device. Click in the top portion of the Pure
Music menu at which point you will see Pure Music listed on the top bar of your Mac
desktop next to the apple. Click on Pure Music and select Audio Setup from the drop
down menu to launch the audio settings menu. Please see image below.
3. After launching the Audio setup, you will need to select the DAC as the output device.
Use the drop down menu and select 32bit 384kHz DSD Interface from the drop down
menu. Next, select Click to Apply Changes (Application Will Relaunch) which is located
near the bottom of the window and Pure Music will shut down and then re-open. At this
point, the DAC is now selected as the output device.