XAIRCRAFT X450 Pro - Manual (Page 18)

P3002-A / P3002-B
螺旋桨正桨 / 螺旋桨反桨
Clockwise Blade / Counter-Clockwise Blade
P3003
桨夹
Blade Locker
螺旋桨安装 Propeller Assembly
P3002-B
螺旋桨反桨
Counter-Clockwise Blade P3002-A
螺旋桨正桨
Clockwise Blade
P3002-B
螺旋桨反桨
Counter-Clockwise Blade P3002-A
螺旋桨正桨
Clockwise Blade
螺旋桨必须贴紧电机，以保证四个螺旋
桨的高度一致性。
Close
to motor to
make sure 4 blades in the same
height.
Motor Blade
用螺丝刀穿
过桨夹上的孔来拧紧桨夹。
We recommend you use the driver to poke through
the hole on the locker for better tighten in case of
any loose of the screw during your flight.
桨夹必须拧紧，以免飞行时脱桨造成危险。建议
16
螺旋桨印有XAircraft标志面朝上，
并确保螺旋桨旋转时方向正确。
Make sure the XAircraft Logo side
up, and check the rotation of
blades.
P3002-A
螺旋桨正桨
Clockwise Blade
P3002-B
螺旋桨反桨
Counter-Clockwise Blade
螺丝刀
Screw Driver